Patchy Lawn?

So you’ve got a bare area in your lawn and you’re thinking of revitalising it with lawn seed?

What you need to find out before doing anything is why the bare area happened in the first place. Otherwise chances are the problem will simply recur.

Reasons the lawn may be bare are:

– The lawn doesn’t get enough sun.

– The lawn doesn’t get enough water.

– There are lawn beetle in it.

So before doing anything first work out what the problem is.

And then it’s to the solution. Obviously ‘lawn seed’ is not the way to fix any of the problems above.

That said I have never seen lawn seed work as a successful solution in any setting. It’s partly because the new ‘lawn’ is always sparse and partly because it rarely gets watered enough to sustain it.

New roll on lawn is always a better option, but only if it gets watered and is laid with adequate sun.

The Irritrol Kwikdial Fuse Message

Its that time of year when I get a multitude of calls asking about the fuse message on Irritrol Kiwkdial controllers.

So firstly – if you have spent time looking for the ‘fuse’ then you will be frustrated because there isn’t one.. And the battery symbol with the line thru it doesn’t mean that the battery is dead, because there isn’t a battery either…

Ok – so whoever designed these wasn’t thinking ease of use!

What does the fuse message mean?

a) You have a solenoid coil that is faulty and causing the controller to fail.

b) The controller has a problem and needs replacing.

Usually I can tell by looking at the controller which is the most likely scenario. If your controller is old, outdoors and looking like its been exposed to rain then chances are it will need replacing. If the error is intermittent then its almost certainly the controller and if the screen is flickering just a little then that is another clue that the controller is about to die.

If your controller is in good condition, maybe inside a garage and the display is stable then it may be that one of the solenoids is the problem. We can determine that by removing solenoid wires and testing to see if it fails with various solenoids disconnected.

As a guide, a solenoid is usually around $150-250 to locate and replace while a controller is around $385.00 to replace.

 

 

Irrigation Controller and Installation in Banksia Grove

If your retic controller is dead, giving you trouble or just difficult to operate then give me a call!

I am based in Yanchep but service the northern suburbs. I carry a range of boxes onboard at all times but generally recommend the Hunter X Core for reliability, ease of use and value for money.

The Hunter has a two year warranty, a back up battery that will last 5-7 years and is remote control enabled (purchased separately).

It is also easy to use and comes with a lockable casing.

Prices as at March 2017 are $375 for a 4 station controller, $385.00 for a 6 station and $415 for an 8 station. These prices include GST and I am a licensed electrician so you can rest assured the job will be done safely and competently.