We are based in the far north of Perth and travel from Two Rocks in the north through to Scarborough and Ballajura in the east.
We generally do not travel outside of these areas however we may be able to do work for you if we are nearby.
Areas further away would incur extra costs in both travel time and fuel.
Some of the areas we service include:
My house is located in Quinns Rocks, 6025 North of the River and would like to know if you can install a rainmaster pro 6 station controller for me.
Currently my Irrittrol Kwikdial outdoor model does not show the display.
It has been working for the past 10 years but stopped working recently.
Does the rainmaster pro have a battery backup?
Please let me know your best price with installation for the outdoor model type.
My first two stations aren’t working I’ve tried reset and righted fuses and still only 3 and 4 work . It’s driving me crazy will you come out to Orelia and if so how much is the fee?
Sorry mate – too far from yanchep. Try ‘Allwest retic’
hey mate i have a irritrol rain dial and it has the issue of the display flashing and it wont put out 24v on the mv or station number. any idea where i can get this fixed around perth? the transformer is fine
Honestly I wouldn’t know as no one repairs them these days. We just replace them. It is more cost efficient and comes with a warranty
Just to check if you cover the surburb Rossmoyne. I have a Rainbird controller in need of servicing.
sorry – too far for me
I have a hunter x core approx. 4 years old and the control dial will not turn anymore. Its like the mechanism in the inside is stuck. Any idea on what would be the problem or could you give a rough price in repairing. I am in Aveley (Ellenbrook). The reticulation still works. thanks
Holman 4 Station Dial Ezy Irrigation Controller when I run the program I notice the clock numbers fade out and the station one stays on. I have to turn the bore pump off and disconnect the battery to stop the station. Reconnect the battery, turn the pump back on and all reads well. reset start time and station duration and days … run program and the same happens again. numbers disappear from the clock and station one stuck on. i have changed the battery, no changes in problem. Is it the controller or other issue. I am in Ballajura. Thanks
it does sound like the controller is one of the problems – but there may be others – have given you a call
Hunter xcore with no display. Tried new batteries, resetting etc. no luck. I’m at Scarborough, let me know when you around to have a look?
Hello. I’ve got an old Holman controller. The fuse blew so I replaced it and it blew again, and again.
After looking online it talks about a surge coming form the solenoids causing it. Is that correct?
yes – correct
Hi. Do you do any work on Saturdays. We have a retic system that needs to be serviced and set located in Pearsall. We live in Waikiki and can only come up on Saturday. Hoping you can help.
sorry I don’t work Saturdays. Try Mr retic tel:+61459059334
Hi – not really sorry. It’s just a sign it’s getting old