I am Getting a Fuse Message on my Irritirol Kwikdial Reticulation Controller

If I had a dollar for every time I hear this…

And if you have spent time looking for the ‘fuse’ then you will be frustrated because there isn’t one.. And the battery symbol with the line thru it doesn’t mean that the battery is dead, because there isn’t a battery either…

Ok – so whoever designed these wasn’t thinking ease of use!

What does the fuse message mean?

a) You have a solenoid coil that is faulty and causing the controller to fail.

b) The controller has a problem and needs replacing.

Usually I can tell by looking at the controller which is the most likely scenario. If your controller is old, outdoors and looking like its been exposed to rain then chances are it will need replacing. If the error is intermittent then its almost certainly the controller and if the screen is flickering just a little then that is another clue that the controller is about to die.

If your controller is in good condition, maybe inside a garage and the display is stable then it may be that one of the solenoids is the problem. We can determine that by removing solenoid wires and testing to see if it fails with various solenoids disconnected.

As a guide at the time of writing this post (March 2018) a solenoid is usually around $150-250 to locate and replace while a controller is around $385.00 to replace.

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *